+86-573-8796 5589

Important Information About Refrigeration Brazed Plate Heat Exchangers


Refrigeration is a critical part of any industry and one that a company cannot afford to be without, especially in food preparation and storage. There are many different types of refrigeration available for companies, but one type of refrigeration that has become more efficient over time is the brazing of plates on refrigeration equipment. Brazing has been used in the manufacture of plate equipment for as long as there have been manufacturing appliances. In fact, the first refrigerator with brazing equipment was manufactured over 100 years ago!

A brazed plate heating exchanger relays heat from one liquid to another. Being smaller than standard gasketed refrigeration brazed plate heat exchangers, the plates actually connect directly to the hot and cold sides of the system. High pressure and temperature: Unlike the standard brazed plate heating exchangers, the brazed plates do not have rubber gaskets around them and can run continuously at up to plus 200 degree C. This makes them ideal for use in a wide range of food preparation areas. They are also very energy efficient because unlike other types of refrigeration that rely on a cooling fan to lower the inside temperature of the systems to maintain it, the heating plates cool the food down very quickly so that they do not have to maintain a constant temperature. This makes them ideal for hot plate applications and for use in high pressure hot water systems that are commonly found in food processing plants and for use in industrial food processing plants.

Refrigeration Equipment - Why Use Refrigeration Brazed Plate Heat Exchangers? As refrigeration equipment, the brazed plates are used to maintain temperatures at specific levels inside the units. Standard brazed plates would develop cracks and damage after long use and this would reduce their efficiency over time. With this refrigeration equipment, the brazing process does not damage the unit and the process does not require frequent replacement of the plates. They also require low maintenance so that they do not need to be frequently upgraded or replaced.



The Refrigeration Process - How They Work: The Refrigeration Brazed Plate Heat exchangers actually contain two layers - the solid oil cooling layer and the gas air cooling layer. The solid oil cooling layer works in conjunction with the heat sink to regulate the process cooling. When it is time to lower the temperature, the oil cooling layer automatically does so. Once it is time for the gas cooling layer to kick in, the gas will pull the temperatures up from the desired level.

Installing Refrigeration Brazed Plate Heat Exchangers: The brazing process of these refrigeration plate chillers can either be installed with the help of an installer or by using a do-it-yourself kit. Both the systems have the same principle and are equally effective in cooling. A compressor should be hooked up to the refrigeration unit while both air and oil cooling pumps should be hooked up into the compressor. Once the system is installed, the evaporator and compressor should be linked through an air duct. The refrigeration brazed plate heat exchangers are typically installed in a part of the compressor.

Refrigeration Equipment Reviews: These refrigeration systems have been tested over time and given several reviews based on different parameters. The heat exchangers are given high marks because they are extremely cost effective. The only disadvantage is that the efficiency of these components diminishes over time. It is important for the owner to ensure that the compressor component is kept clean because dirt and oil will affect the performance of the refrigeration components. Refrigeration equipment should be maintained properly so that it lasts longer.